Preparation
To use the Streamlabs Controller app, you need a phone capable of:
- Running the latest version of the Streamlabs Controller app
- Android version 5.1 or higher (Android Google Play Store)
- iOS version 12 or higher (Apple App Store)
Connect to Streamlabs Desktop Over Local Network
- Have Streamlabs Controller app on your phone up-to-date.
- Connect your mobile device to the same local network Streamlabs Desktop is on.
- Make sure that 'AP Isolation' or 'Access Point Isolation' is not enabled.
- If using a guest wifi point, allow devices to access the local network.
- Allow Streamlabs Desktop through the firewall.
- Open Streamlabs Desktop ⚙️
Settings > Remote Control
and clickSHOW
on the QR-code. - Start the application on your phone and go to
Remote Control
- Scan the QR code with the scanner.
Unable to connect Streamlabs Controller App
If you are still unable to connect to Streamlabs Desktop, and you are sure you have opened the firewall and are on the same local network, go to ⚙️Settings
> Remote Control
and click SHOW on the blurred QR-code and then click Show Details below the QR-code and Generate New to generate a new API key. After doing so reboot your computer and try connecting the Streamlabs Remote again by scanning the QR-code.
Also, if your WiFi has multiple bands (like 2.4 GHz and 5 GHz) please try each one.
Unable to scan the QR code from Streamlabs Desktop
Make sure the Streamlabs Controller app is closed before trying the following, and then try to scan with another app capable of scanning QR codes. It should open your browser app and then automatically redirect to the Streamlabs Controller app, log you into the app, and connect the Remote control feature.
Note: that it's possible the browser is blocking the redirection. If you are using Samsung's browser for example, you might either need to enable the QR code scanner integrated into the browser and scan from it OR use a dedicated QR code scanner app that isn't the built-in camera app.
If you are still unable to scan the QR code, you can try to manually connect, go to ⚙️Settings
> Remote Control
and click SHOW on the blurred QR-code and then click Show Details below the QR-code. Now go into the Streamlabs Controller app into Remote
> Manual Connection
here you'll be able to enter the corresponding information found on the Streamlabs Desktop Remote Control tab.
Connect RC with No/Broken Camera
This solution might work if you can run Streamlabs: Livestreaming app on an unsupported device where it notifies you that the scanner is not available yet (ex. Kindle Fire 5th Gen.).
If you have a mobile device with a broken or no camera and would like to use it for the Streamlabs Controller app, you could try the following steps to connect the Streamlabs: Livestreaming app to Streamlabs Desktop.
- Follow Steps 1 to 5 of the "Connect RC Over Local Network" steps listed above.
- Take a snapshot of the QR code and save this locally on your computer.
- You can use
win-key
+shift
+s
to take a snip of a region. - Windows 10 has a built-in
Snipping Tool
to snip a region and save. - Other third-party apps around can do the same.
- You can use
- Decode the saved QR-code with a decoder like this website
- Copy the raw or parsed text and email the link to yourself.
- Open the email on your mobile device and open the emailed link with Streamlabs: Livestreaming application.
Connect Streamlabs Controller Over the Internet
It is possible to connect the RC via the internet, but some advanced network knowledge might be required. Also, keep in mind that if your home internet is on a dynamic IP address from your ISP, this IP can change, and you need to adjust this accordingly if changed.
- Make sure that SD is connected via Local Network first.
- Open and forward port
59650
in your router to the computer running Streamlabs Desktop.- You can change the default 'external' port, but forward to
59650
internally.
- You can change the default 'external' port, but forward to
- Open the Streamlabs Controller app on your mobile device.
- Head to
Remote
>Manual Connection
- Change the IP to your
Public IP address
- To get your public address, you can check out whatismyip.com.
- If you used another port to forward, replace the default port.
- Press
OK
and head back to Remote Control.